Add files via upload
This commit is contained in:
桐话
@@ -0,0 +1,751 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 tdleiyao <tdleiyao@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/input/rk-input.h>
|
||||
#ifdef DTS_NO_LEGACY
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#else
|
||||
#include <dt-bindings/display/rockchip_vop.h>
|
||||
#endif
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Panther X2";
|
||||
compatible = "panther,x2", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
mmc2 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait";
|
||||
};
|
||||
|
||||
fiq_debugger: fiq-debugger {
|
||||
compatible = "rockchip,fiq-debugger";
|
||||
rockchip,serial-id = <2>;
|
||||
rockchip,wake-irq = <0>;
|
||||
/* If enable uart uses irq instead of fiq */
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
||||
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
debug: debug@fd904000 {
|
||||
compatible = "rockchip,debug";
|
||||
reg = <0x0 0xfd904000 0x0 0x1000>,
|
||||
<0x0 0xfd905000 0x0 0x1000>,
|
||||
<0x0 0xfd906000 0x0 0x1000>,
|
||||
<0x0 0xfd907000 0x0 0x1000>;
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led_pwr: led-pwr {
|
||||
label = "led-pwr";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pwr_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
led_wifi: led-wifi {
|
||||
label = "led-wifi";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_wifi_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
led_eth: led-eth {
|
||||
label = "led-eth";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_eth_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
led_status: led-status {
|
||||
label = "led-status";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_status_enable_h>;
|
||||
retain-state-suspended;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
post-power-on-delay-ms = <100>;
|
||||
};
|
||||
|
||||
wireless_wlan: wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6236";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
snps,reset-gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_rgmii_bus>;
|
||||
|
||||
tx_delay = <0x41>;
|
||||
rx_delay = <0x2e>;
|
||||
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
|
||||
&i2s1m1_lrcktx &i2s1m1_lrckrx
|
||||
&i2s1m1_sdi0 &i2s1m1_sdi1
|
||||
&i2s1m1_sdi2 &i2s1m1_sdi3
|
||||
&i2s1m1_sdo0 &i2s1m1_sdo1
|
||||
&i2s1m1_sdo2 &i2s1m1_sdo3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_pwr_enable_h: led-pwr-enable-h {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_wifi_enable_h: led-wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_eth_enable_h: led-eth-enable-h {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
led_status_enable_h: led-status-enable-h {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vcc_3v3>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
mmc-hs200-1_8v;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
max-frequency = <150000000>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
supports-sd;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
max-frequency = <150000000>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr104;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
supports-sdio;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
||||
status = "disabled";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca1v8_pmu>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
dr_mode = "host";
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost_dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// video output
|
||||
|
||||
&hdmi {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&reserved_memory {
|
||||
ramoops: ramoops@110000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0x110000 0x0 0xf0000>;
|
||||
record-size = <0x20000>;
|
||||
console-size = <0x80000>;
|
||||
ftrace-size = <0x00000>;
|
||||
pmsg-size = <0x50000>;
|
||||
};
|
||||
};
|
||||
|
||||
&bus_npu {
|
||||
bus-supply = <&vdd_logic>;
|
||||
pvtm-supply = <&vdd_cpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iep {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iep_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&jpegd_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpp_srv {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk_rga {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc {
|
||||
venc-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vepu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>, <&cru PLL_GPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user